Downloading/Modify ECM Map
This is just a teaser and the rest will come as screen captures are completed.
The ECM on the Odes UTV\'s are Delphi MT05 and are easy to download but you need the correct software to accomplish that task.
Bitedit/Bitbox is the only software package I know of that has a module for the MT05, I am sure there are others but I didn't see any. Anyway you need a few different cables and adapters but you will then have access to the ECM for tuning or just wanting to see what it is all about and options available.
I am going to post up links and images of what is required to download the ECM data.
Obviously you would need Bitbox as it is the software interface to download the ECU maps. Then you would need the TacTrix Openport 2.0 J2534 pass-thru adapter as well as the 6 pin diagnostic connector plug to OBDII connect as shown in image below.
Tactrix Openport 2.0 J2534 pass-thru adapter / 6 pin to OBDII adapter cable:
Odes Map List
Full Load Lambda: .82 Lambda = 12.05 AFR / .87 Lambda = 12.79 AFR
Spark Curve Partial Load:
Spark Curve Full Load: